VIAIR Constant-Duty Onboard Air System 10007

$399.95

Additional information

Weight 12 lbs
Dimensions 12 × 12 × 12 in

VIAIR’s Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle compressors, a 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires for up to 37″ Tires.

Please Note: Pressure Switch w/Relay (PNs 90110, 90111, 90113, 90118) is not a sealed unit and should be installed in an area protected from the elements to prevent damage and/or failure.

Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.

Specifications

  • Complete onboard air system kit
  • Long-running 450C compressor
  • 2.5 gallon tank
  • 12-volt
  • Permanent magnetic motor
  • Duty cycle: 100% @ 100 PSI
  • Max working pressure: 150 PSI
  • Max amp draw: 23 amps
  • Ingress protection rating: IP67
  • California Residents: WARNING

Pin It on Pinterest

preloader