VIAIR Heavy-Duty Onboard Air System – 10005

$314.46

Additional information

Weight 12 lbs
Dimensions 12 × 12 × 12 in

PRODUCT OVERVIEW

Complete in a Box, by ordering a single part number, you can take all of the guess-work out of getting all of the parts you’ll need to install one of the most sophisticated, all-inclusive onboard air systems available today. The Viair Heavy Duty Onboard Air System comes complete with a super fast 400C, 33% Duty Cycle compressor at its heart that will fill the supplied 2.5 gallon tank from 110-150 PSI in approximately 45 seconds. Viair included everything you’ll need to add a reliable air source to your vehicle as well as inflate tires with the included clip-on air chuck. (For vehicles with up to 35-inch tires) with 150 PSI maximum working pressure and can be used for up to 40 minutes continuously. May be used to power everything from small air tools to air horns and more. The heavy duty onboard air system can inflate a 33×12.5in tire from 0 to 30 PSI in 4 minutes.

Please Note: Pressure Switch w/Relay (PNs 90110, 90111, 90113, 90118) is not a sealed unit and should be installed in an area protected from the elements to prevent damage and/or failure.

Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.

Specifications

  • VIAIR | Part Number: V/A10005
  • Duty Cycle:100 Percent @ 100 psi
  • Tank Volume:2.5 Gallon
  • Maximum Air Pressure:150 PSI.
  • Amp Draw:26 Amps
  • Fitment:Universal Fit

Pin It on Pinterest

preloader